ǰ or 𵨸˻

 ǰҰ
 FLUKE
 BAUR
 BRUKER
 Chroma
 Dewesoft
 YOKOGAWA
 GRAPHTEC
 Petit ΰ
 midi ΰ
  ÷
 ISA
 IWATSU
 Hioki
 KIKUSUI
 NOISEKEN
 Noise & Vibration
 
 з¼
 µ
 TECHIMP
 TEMPSEN
 Nf
 ATCP


 

 ۾ : Ǿؿũ
ȸ : 2,456  

 

  [midi ΰ] midi ΰ

  𵨸 : GL220


GL220

Instrument
GL220Other featuresEasy application softwareEasy operation and device setupLarge easy-to-read 4.3-inch wide TFT color LCDBuilt-in 2GB Flash MemoryMaximum sampling rate of up to 10ms10 isolated channels, each with multifunction input

Handy-type Logger with huge 2GB Flash Memory

10 isolated channels, each with multifunction input

Its compact size contains an isolated input system which ensures that signals are not corrupted by inputs to other channels, thus eliminating wiring concerns. The GL220s multi-type inputs are suitable for voltage, temperature, humidity, pulse, and logic signals, enabling combined measurements of different phenomena like temperature/humidity and voltage.
 
 

10 isolated channels, each with multifunction input

*) The input signal needs to be not exceeding the specified voltage at any time.
The component in the amplifire of the unit may have the damage by over voltage.
Please check the details of over voltage in the specification sheet (Maximum input voltage or Withstand voltage seccion) or the caution label attached on the unit.

TOP

Maximum sampling rate of up to 10ms

Provides faster sampling rates for voltage measurements. Can achieve 10ms sampling interval when limiting the number of channels in use.

Sampling interval 10ms 20ms 50ms 100ms 1s
Number of channels 1 2 5 10 10
Measuring*2 Voltage X X X X X
Temperature N/A N/A N/A X X

X: selection is available, N/A: selection is not available.

*2:
For humidity measurements, the 0-1V range and scaling function are used to display results directly in Relative Humidity. Sampling rate limitations are same as those for voltage measurement.

External sampling function

Captured data can be synchronized with external timing signals when the external sampling rate function is used.*3

*3:
The Logic/alarm cable, (B-513 option), is needed to connect the alarm output ports.

TOP

Large easy-to-read 4.3-inch wide TFT color LCD

Utilises a bright clear 4.3-inch wide TFT color LCD monitor (WQVGA: 480 x 272 dots). Makes it easy to read data in waveform or digital form and to check your measurement parameter settings. The background color of the screen can be set to black or white.

Waveform display (Analog + Digital)

Waveform display (Analog + Digital)
 

Dual display (Current + Past)

Dual display (Current + Past)
 

Waveform display (Analog only)

Waveform display (Analog only)

Digital display

Digital display

TOP

Built-in 2GB Flash Memory

Built-in 2GB Flash Memory for reliable long term measurement

The 2GB Flash Memory enables secure long term data measurement without using an external storage device. Data is retained even when power is turned off because flash memory is used.

Capturing time*4 (10 Analogue channels being used.)

Sampling interval 10ms*5 50ms*5 100ms 200ms 500ms 1s 2s
Built-in 2GB Flash memory 38 days 83 days 97 days 194 days 485 days 971 days 9,714 days
512MB USB memory stick*6 9 days 21 days 24 days 49 days 124 days 248 days 2,481 days
*4:
The above figures are approximate.
*5:
The sampling rate is limited by the number of channels in use. (10ms: 1ch, 50ms: 5ch)
*6:
Standard USB memory devices without high-end functions such as fingerprint recognition are required.

Hot-swappable USB memory sticks

Also supports popular USB memory sticks for external storage. The GL220 saves measured data directly to USB memory sticks. USB memory sticks can be replaced during measurement without data loss.

Hot-swappable USB memory sticks

Ring memory function

The most recent data is saved when internal memory or external memory is configured in ring memory mode. Captured data size in ring memory mode is limited to 1/3 of available memory.

TOP

Easy operation and device setup

Ergonomically designed and easy to operate, just like a mobile device. The input/output terminals and keybord layout are arranged so that it can be operated in hands-on mode even when recording data.

Easy operation and device setup
 
 

Parameters in the AMP settings menu can be easily changed whilst viewing the waveform.
 

AMP parameter setting screen

TOP

Easy application software

Easy connection to PC

The GL220 can be controlled by a PC if connected by USB cable, allowing transfer of data to a PC in real-time.


 

If you need to move large data files to your PC then the GL220 can emulate an external USB drive for quick data transfer.


 

Up to 10 units can be connected to 1 PC. Measurements can be performed simultaneously or independently.

Various measurement screens

Select from 4 screens such as the Y-T (waveform + digital), Y-T (large waveform), digital view and report view to display measurements in real time. The direct-Excel function enables captured data to be written directly to an Excel file.

Waveform (Y-T) display

Digital display

Report display

Direct-Excel display

   

Substantial data replay screens

Three screens such as the Y-T (waveform), digital and the X-Y graph for specified data are available to view measurements in replay mode. The maximum, minimum, average and peak-to-peak vales between cursors are indicated in the digital display screen.

Waveform (Y-T) display

Digital display

X-Y (specified data) display

Simple configuration screens

The number of configuration screens has been reduced to five. Parameters can be set easily while viewing measured waveforms.
 

AMP parameter setting screen

Useful functions

Post-process your captured data with useful functions for arithmetic calculation, statistical calculation, search and file format conversion.

Useful functions

TOP

Other features

Can be used with 3 types of power source

Chose from AC supply, DC supply or the optional battery pack which enables 6 hours*7 of continuous measurement. The power source is automatically switched to the battery pack when the AC power supply is interupted. If the capacity of the battery pack goes low then measurement is automatically terminated and the captured data file is closed and protected.

*7:
DC power drive cable and battery pack are optional extras. Measuring time by using the battery pack varies on the conditions.

Alarm output function

Alarm signals can be output when alarm conditions occur. Four alarm output ports are fitted.*8

*8:
The Logic/alarm cable, (B-513 option), is needed to connect the alarm output ports.

Calculation function

Measured data can be compared with other channels in real-time. Four arithmetic functions can be selected. The calculation result is saved as measured data when the built-in memory or the USB memory stick is selected as the destination for the captured data.


 
 

Total 6
[midi ΰ]
midi ΰ 
GL240
[midi ΰ]
޴ ͷΡ 
GL840
[ ÷]
÷ 
GL7000
[midi ΰ]
midi ΰ 
GL820
[midi ΰ]
midi ΰ 
GL220
[Petit ΰ]
Petit ΰ 
GL100N
   
 
 

ڷα α׾ƿ